+86-13567453430 ; +86-0574-62477021

News Center

Rich?Experience:?We are specialized in polyester fabric for 5 years and have good reputation in this lines.

Cosmetic bottle lotion pump head knowledge

Cosmetic bottle lotion pump head knowledge
1. Emulsification pump head, aerosol valve, vacuum bottle can also be divided into nozzle type and nozzle type in terms of function, and can be divided into nozzle and nozzle according to the purpose.
2. The size of the pumping head is determined according to the diameter of the bottle body, the standard spray of 12.5mm-24mm, the water output is 0.1ml/time - 0.2ml/time, usually used for perfume, gel water and other commodity packaging. , the same size as the soap can be determined according to the size of the bottle.
3. Emulsification pump head? The standard value is 16~38ml, and the water output is 0.28ml/time-3.1ml/time. It is mainly used for cream and scrubbing products.
4. Special dispensing devices, such as foam pump head and hand button type spray head, it is a non-air-filled hand pump head, which can generate foam without air injection, and can form high-quality foam with only light pressing. Usually comes with a dedicated bottle. Hand button sprinklers are generally used for cleaning items, such as cleaning.
5. The composition of the distributor is relatively chaotic, usually including: dust cover. Plug. Terminal. Pad. Piston. Spring. Valve cover. Pump body. Lid. Dust cover can be dyed, electroplated, can be covered with electric aluminum ring. Since a group of pump heads involves many molds and the order quantity is large, the MOQ is 10,000-20,000.
6. The vacuum bottle is generally cylindrical, the standard is 15ml-50ml, the single is only 100ml, and the full capacity is small. Relying on the principle of air pressure, it can prevent the pollution of cosmetics during use. The anodized aluminum vacuum bottle is packed in a vacuum bottle. For plastic electroplating and colored plastic, the quotation is more expensive than other ordinary containers, and the general order quantity is not high.
7. Distributor customers rarely open their own molds, so they need a lot of molds and the cost is high.